Install screw machine must pay attention to security matters

Compressed air and electricity are dangerous. The operator must observe the following safety measures:

1 compressor placement of the ground must be flat , and the ground must not be soft soil .

(2) distribution , select the correct power wire and make sure the voltage is correct. In the power line , you must install the air switch , fuse and other safety devices. In order to ensure the reliability of electrical equipment , you are requested in accordance with the relevant provisions of the electrical installation , connected to a suitable ground wire , and left around the machine the necessary space for maintenance .

3 The competent road piping , piping must have 1o - 2o downward tilt.

4 The first time you turn on the power cord , or when there is a change must check the motor rotation direction is correct . To prevent the loss of oil burning nose .

5 In the unit operation , do not loosen , remove any piping accessories , fittings and components. Unit filled with high pressure and temperature of the liquid , can cause serious personal injury.

6 on the compressor maintenance ( eg refueling ) , repair work , you must :

a) units Parking :

b) cut off the power , make sure the compressor is switched off ;

C) to ensure that the system has no pressure compressor .

7 compressor nameplate shall not be higher than the required run the compressor discharge pressure .

8 valve installed in the oil separator seat, once the system pressure exceeds the set pressure of the gas , the gas will be released through the valve , then be sure to check overpressure causes.

9 must be specified recommend using our screw air compressor oil, mix different grades of lubricating oil is strictly prohibited .

10 compressor motors, temperature sensors, pressure transmitters, electrical control box , wires , oil separator filter and other components should be checked periodically , such as long-term neglect of maintenance parts may cause fire.

11 Compressor assembly requires high-tech professionals . Do not disassemble the compressor host.